32
Relay
Number
Errors detected as an
overall percentage of
Tx transmissions for
this test run
Checksum Error
Data Packet
Corrupted
Command Errors
Data Packet Correct
But Not The One
Expected
Number of Data Transmits
Number of Data Receives
Number of time outs.
i.e detector did not
respond quickly
enough to request for
data from Tocsin 750.
Note that the overall percentage error rate should be less than 0.5%.
Anything greater than this is indicative of a problem requiring correction. Usual errors arise from
poor cable termination or poor cable screening and should be corrected prior to final
commissioning.
Transmissions and error rate
since last reset
Overall errors rate
should be <0.5%
Response Time
<10mS
The Relay Diagnostics Function
