IGBT D
IMMER
R
ACKS
Installation
& Operation
23
: Many manufacturers are now using Category 5 wiring for DMX512. With the Capio Plus IGBT Dimmer Rack,
DMX512 must NEVER be connected using RJ-45 connectors. These connectors are for Ethernet connections only.
: Control wires may also enter through side knockouts. See Figure 12 for knockout placement.
Control Wiring (continued)
Figure 20: Control Wiring Installation
Feed wires
through this hole,
then up through
hollow side wall
Control wires enter
through these knockouts
Ethernet CAT5e
Terminate cable to
removable punch-
down jack
Control wires enter through these knockouts
DMX512
Coil excess
CAT5e wire
here
LYTEmode
Coil excess
DMX512 wire
here
!
