13.
PROBLEMS, CAUSES and SOLUTIONS
PROBLEM POSSIBLE
CAUSE
SOLUTIONS
Stove does not work.
•
Electrical failure or lack off
• Fuse blown.
• Broken Pressure switch
•
Smoke exit or air passage through the
air ducts
• Ch
eck that the electrical socket and main switch
are in the working position.
•
Check the fuse.
• Check the pressure sw
itch.
•
Clean smoke outlet and/or clean the smoke duct.
Stove fire in self off and / or the
stove stops automatically.
•
The pellet hopper is empty.
• T
he pellet feeder does not work.
• The pellet temperature sensor
is
malfunctioning.
• The door is not fu
lly closed.
•
Unsuitable pellet.
• Low pellet ratio
• The combustion chamber is dirty.
• Smo
ke outlet blocked
•
Pressure switch cuts.
• Fum
e extraction engine failed.
•
Fill the pellet hopper.
• Call technical service
.
• Close the door or replace with orig
inal spare
parts.
• Use the type
of pellets recommended by the
manufacturer.
• You hav
e checked the fuel feed rate by the
technical service. Clean the combustion chamber
as indicated in the manual.
• Clean the smoke d
uct.
• Check if the smoke channel is bl
ocked
Stove is working a few minutes
and then off
•
The ignition cycle is not complete.
• T
here may be temporary failure in the
electricity supply.
• Ig
nition spark plug failure.
• The temperature sensors are defecti
ve
or defective.
• Smoke channel blocke
d
•
Run the ignition cycle again (open close).
• Check the conditions above.
• Make su
re the smoke channel is clean.
• Check the se
nsors and replace the sensors if
necessary.
• Check the plug and replace if necessary.
Summary of Contents for GALATA
Page 2: ...1...
Page 25: ...24 8 TEMEL PAR ALAR VE BOYUTLAR Model Galata...
Page 27: ...9 BA LANTI EMALARI 9 1 Anakart...
Page 61: ...60 8 MAIN PARTS AND DIMENSIONS Model Bosphorus...