IFYIL GALATA, User Manual

Page: 47 / 80

46
O - Close
| - Open
If the stove is installed next to flammable wall, isolation for the
wall should be done.
•
If the base where the stove is to be installed is made of flammable
materials. If the stove is put on flammable material, suitable isolation must
be done.
• Please keep away heat sensitive materials from stove (flammable, explosive
etc.).
4.2. Electrical Connections
First insert the power cable into the back of the stove, then insert
the cable outlet. Opening the back of the stove on / off switch to turn
on your stove, bringing the open position.
A voltage regulator using is required in areas
with voltage irregularities. Electronic and
electronic card failures that may occur due to
the absence of a voltage regulator are not covered by the
warranty.
Use your stove and running in a socket with ground.
4.3. Plumbing Schema
• 120 cm and longer radiator must be connected to the installation with a reverse
connection.
• Hydro boiler’s connections must be made with conical iron union.
• Installation should definitely fill and drain valve.
• Safety valves must be in the water outlet. The safety valve is mounted on the body.
• Boiler lit (off) the water pressure should be in the range of 1-1,5 bar. Otherwise drain / refill
valve should be checked.
• It is recommended to install a thermostatic valve in the radiators to ensure that
the room temperature can be kept to the desired degree and to provide high
comfort at low cost.
• Anti Condensation valve is recommended. (Number 3).
• No particle, dirt, lime or chemical additives should not be in the plumbing water to
be used, aggressive waters of with corrosion should not be used.