IFYIL AVANOS, User Manual

Page: 10 / 51

9
3. FUEL SPECIFICATION
In order to achieve the maximum performance of IFYIL stoves; Calorific value
and properties of the fuel to be used is very important. The calorific value of the
fuel depends on the humidity and density. The tendency of the moist fuel to
burn is low. The humidty in the fuel provides less heat as more energy is
needed to evaporate. The yield / performance of the product may vary
depending on the type of fuel used. Please observe the following when selecting
/ using the fuel.
Otherwise, IFYIL will not accept any responsibility for
your problems related to heating and any faults that may occur.
For Wood;
The wood logs to be used should have a moisture content of less than 20% and
should be stored in a dry place. The use of damp wood, the soot can
accumulate in the chimney and may cause the formation of fire.
Not all trees have the same characteristics. Drying time and calorific value vary
according to the type of wood. Fresh (wet) wood is not suitable for combustion
because it has a moisture content of about 60%. It is therefore recommended
that fresh (wet) wood be dried in a dry and ventilated place for at least two
years before use.
The wood from resinous trees creates a lot of soot, often requires
more chimney and stove cleaning and can shorten the life of your
device.
Continuous and long-term use of aromatic trees (eucalyptus, myrtle,
etc.) will damage the grill portion of the product.