4
5.2 Teach button
5.2.1 Start programming mode
►
Press the teach button for 2 s...6 s.
>
Yellow status LEDs flash (1 Hz), the unit is in the programming mode.
If programming has not been completed successfully, the unit returns to the
previous setting.
5.2.2 Set output response
►
→ 5.2.1).
► Position the object in P1 (Fig. 1 or 2).
►
Press the teach button for 1 s.
>
Yellow status LEDs flash (2.5 Hz), P1 setting is completed.
► Position the object in P2 (Fig. 1 or 2).
►
Press the teach button for 1 s.
>
Yellow status LEDs flash briefly (4 Hz), P2 setting is completed.
5.2.3 Invert output response
►
Press the teach button for > 6 s.
>
Yellow status LEDs flash (> 10 Hz).
>
Yellow status LEDs flash briefly (> 4 Hz).
> Output function is inverted.
5.2.4 Restore factory setting
►
Align the unit so that no echo is received.
>
Green echo LED off.
►
→ 5.2.1).
►
Press the teach button for 1 s.
>
Yellow status LEDs flash briefly (4 Hz), factory setting is restored.
