SDP110
Air gap sensor
24
10.1.2.2 Function Tag
•
Customer-specific functional description.
•
Maximum length 32 characters and freely definable.
10.1.2.3 Location Tag
•
Customer-specific application description.
•
Maximum length 32 characters and freely definable.
10.1.3 Parameters
The unit is configured via the parameters. The parameters described below are only available
via the IO-Link interface.
10.1.3.1 Access locks to the units: Local parameter setting
•
[Open]: The unit can be adjusted using the keys on the unit.
•
[Blocked]: The keys on the unit are locked so that settings on the unit and unlocking can only be
made via IO-Link.
10.2 Parameter setting via the unit keys
10.2.1 Parameter setting in general
Intention
Action
Change from the process value display to the main menu
[●]
Change to the submenu
Use [▼] to navigate to the sub-
menu (e.g. EF), then [●]
Select the requested parameter
[▲] or [▼]
Change to the setting mode
[●]
Modification of the parameter value
[▲] or [▼] > 1 s
Apply the set parameter
[●]
Exit parameter setting without saving
[▲] and [▼]
Return to the next higher menu level
(repeat several times to reach process value display)
[▲] and [▼]
Return to the process value display
> 30 seconds (timeout)
The unit keys can only be locked via the IO-Link interface. Unlocking is then only possible via
IO-Link.
10.2.2 Presets
Before setting the parameters, first check the following default settings and change them if
necessary:
- [SEL1]: Process value for OUT1
- [SEL2]: Process value for OUT2
- [uni.D]: Standard unit of measurement for distance
- [uni.F]: Standard unit of measurement for flow
- [uni.P]: Standard unit of measurement for pressure