![background image](http://html1.mh-extra.com/html/ifm/saxx04-series/saxx04-series_operating-instructions-manual_4152785017.webp)
17
UK
Explanation basic settings (CFG)
uni
Standard unit of measurement for flow�
dAP
Measured value damping for flow�
FOU1
Behaviour of output 1 in case of a fault: OU, On, OFF�
FOU2
Behaviour of output 2 in case of a fault: OU, On, OFF�
Explanation min/max memory (MEM)
Lo�F
Minimum value memory for flow�
Hi�F
Maximum value memory for flow�
Lo�T
Minimum value memory for temperature�
Hi�T
Maximum value memory for temperature�
Explanation display settings (DIS)
coLr
Colour configuration of the display: rEd (red), GrEN (green)�
diS
Update rate and orientation of the display: d1���d3 (measured value update
rate), rd1���rd3 (display rotation), OFF (display off)�
SELd
Standard display: flow or medium temperature
9 Set-up
After power on and expiry of the power-on delay time, the unit is in the normal
operating mode� It carries out its measurement and evaluation functions and
generates output signals according to the set parameters�
For the analogue output 2 (OUT2), the output signal is at 20 mA during the pow-
er-on delay time�
In the first 2 seconds, analogue output 1 (OUT1) is passive and available for IO-
Link communication� During the remaining power-on delay time, the output signal
is at 20 mA�