2
B
C
A
►
Grease thread and sealing (B) of the
coupling nut (C) with paste (A).
The paste must be suitable and ap-
proved for the application and compat-
ible with the elastomers used.
D
►
Slip the coupling nut onto the sensor (D)
from the bottom.
F
E
A
D
►
Grease the sensor thread with the paste
(A) (see above ).
►
Place the sealing ring (E) in the groove
(F) of the sensor.
The adapter is supplied with an EPDM
O-ring. More sealing rings are available as
accessories:
• FKM O-ring, order no. E30123.
• PEEK sealing ring, order no. E30124.
Use a new adapter when changing from a
PEEK seal to O-ring sealing.
