3
UK
•
The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator.
• Installation, electrical connection, set-up, operation and maintenance of the
product must be carried out by qualified personnel authorised by the machine
operator.
• Protect units and cables against damage.
• Avoid static and dynamic overpressure exceeding the given overload pressure
(→ Technical data) by taking appropriate measures.
•
The indicated bursting pressure (→ Technical data) must not be exceeded.
Even if the bursting pressure is exceeded only for a short time, the unit may be
destroyed. CAUTION: risk of injury!
•
For submersible pressure transmitters PS3xxA: Adhere to the remarks for safe
use in hazardous areas (→ ATEX operating instructions).
3 Items supplied
For the measuring range and the cable length please refer to the data sheet of the
corresponding submersible pressure transmitter.
The submersible pressure transmitters PS3xxA are approved for use in hazardous
areas.
The following components are available as accessories (to be ordered separately):
Order no.
Cable clamp fastener for placing the submersible pressure transmitter
in the tank*
E30399
Filter element for fixing on the capillary ventilation*
E30400
Splitter box for electrical connection*
E30401
Additional weight to increase the dead weight of the unit
E30402
*CAUTION: use only outside the hazardous area.