Electronic pressure sensor
PM11
5
3 Intended use
The unit measures and monitors the system pressure of machines and installations.
Two outputs are available:
OUT1: Measured pressure value via IO-Link.
OUT2: Analogue signal proportional to pressure 4...20 mA.
3.1 Application area
Type of pressure: relative pressure
Information on pressure rating and bursting pressure
Ò
Data sheet
Avoid static and dynamic overpressure exceeding the indicated pressure rating by taking
appropriate measures. The indicated bursting pressure must not be exceeded. Even if the
bursting pressure is exceeded only for a short time, the unit may be destroyed. ATTENTION:
Risk of injury!
Not suitable for systems that have to meet the criteria of E9.2 / 63-04 of the 3-A standard.
The units are vacuum resistant. Adhere to the specifications in the data sheet!
