9
UK
5.1 Mounting accessories
Depending on the location and type of installation, you can use the following
mounting accessories:
Description
Article no�
Smart Camera mounting set
E3D301
Smart Camera cooling element
E3D352
Smart Camera heat conductor
E3D353
2x Smart Camera cooling element
E3D354
Available accessories: www.ifm.com
6 Electrical connection
ATTENTION!
Depending on the operating mode, the device may heat up�
The difference between the camera's surface temperature and the ambient
temperature must not exceed 25 degrees� Take one or several of the
following measures:
► Adjust the operating mode.
► Make sure the device is sufficiently cooled (e.g. with cooling element
and heat conductor)�
► Use a contact protection.
ATTENTION!
The device must be connected by a qualified electrician.
Device of protection class III (PC III)
The electric supply must only be made via PELV circuits�
Electric supply must comply with UL61010-1, chap. 9.4 - Limited Energy.
The separation of external circuits must comply with UL 61010-2-201,
figure 102�
► Disconnect power before connecting the device.
ATTENTION!
The IP rating indicated in the data sheet is only guaranteed if the M12
connectors are firmly screwed.
The device can be damaged by insufficiently tightened M12 connectors�
► Firmly screw the M12 connectors to the device.
