background image

5

UK

We charge €30 for each request. Please write “source for product Y” in the memo 

line of your payment. Your request should include (i) the name of the covered 

binary, (ii) the name and the version number of the ifm product, (iii) your name and 

(iv) your return address� 
This offer is valid to anyone in receipt of this information� This offer is valid for at 

least three years (from the date you received the GLP/LGPL covered code).

2  Safety instructions

•  The device described is a subcomponent for integration into a system�

 -The manufacturer is responsible for the safety of the system�
 -The system manufacturer undertakes to perform a risk assessment and to 

create documentation in accordance with legal and normative requirements 

to be provided to the operator and user of the system� This documentation 

must contain all necessary information and safety instructions for the operator, 

the user and, if applicable, for any service personnel authorised by the 

manufacturer of the system�

•  Read this document before setting up the product and keep it during the entire 

service life�

•  The product must be suitable for the corresponding applications and 

environmental conditions without any restrictions.

• 

Only use the product for its intended purpose (→ 3 Functions and features).

•  If the operating instructions or the technical data are not adhered to, personal 

injury and/or damage to property may occur.

• 

The manufacturer assumes no liability or warranty for any consequences 

caused by tampering with the product or incorrect use by the operator.

•  Installation, electrical connection, set-up, operation and maintenance of the 

product must be carried out by qualified personnel authorised by the machine 

operator�

•  Protect units and cables against damage�

Summary of Contents for O3D3 Series














Reviews: