IFM mobileIoT CR3145, Operating Instructions Manual

Page: 11 / 22

mobileIoT gateway CR3145
11
COB ID Start byte
Length
(bytes)
Type Object
Position
0x03 0 4 R32 Positioning – speed over ground
4 4 R32 Positioning – GPS odometer
4.6.1 Automatically send GNSS data to the mobileIoT platform
The device can automatically determine the GNSS position and send it to the mobile IoT platform.
The configuration is made via the following objects:
Object Index Subindex Type Default Description
GNSS-interval 0x4009 0x02 U32
rw 900,000 Interval of the GNSS position logging (in
ms). Set to 0xFFFFFF to deactivate this
function. Min. value = 60,000
GNSS-distance 0x4009 0x03 U32
rw 0xFFFFFFFF Distance between the most recent position
determined and the current position (linear
distance). The minimum distance is 3 me-
tres.
Logging – file up-
load period 0x3333 0x1C U16 0x01 Period in minutes. When this time has
elapsed, the logged file is closed and trans-
mitted to the server.
Set this value to 0 to deactivate the period.
All data available in the respective device mode are sent via the CAN1 interface.
The exact index and subindex can be found in the corresponding EDS file.
4.7 Energy management
Different energy modes control the energy consumption of the unit. In addition to the standard mode,
the unit also features a sleep mode. In this mode, some functions are deactivated to save energy.
Specific events cause the unit to return to the standard mode.
No mobile radio connection is possible in sleep mode.
Energy management is accessed via the following objects:
Object Index Subindex Type Default Description
Power manage-
ment – deep
sleep flag 0x3333 0xF3 U8
wo — If this flag is set, the unit can only be woken
up from sleep mode via clamp 30, clamp 15
or CAN1.
The unit will not make up from sleep mode
cyclically or on a vibration event.
Use e.g. during transport
u
Set this flag before changing to sleep
mode.
GB