UK
Operating instructions FX460
5
2 Safety instructions
●
The described unit is a subcomponent to be integrated into a system� The
builder of the system is responsible for the safety of the system� It is the
system builder’s responsibility to perform a risk assessment and to draft a
documentation, in accordance with legislation and standard requirements, to be
provided to the system operator and the system user� The documentation must
contain all information and safety instructions required by the operator, the user
and, if applicable, by any service personnel authorised by the builder of the
system�
●
Read this document before setting up the product and keep it during the entire
service life�
●
The product must be suitable for the corresponding applications and
environmental conditions without any restrictions�
● Only use the product for its intended purpose (→ 3 Functions and features).
●
If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur�
●
In case of malfunctions of the unit, please contact the manufacturer� Tampering
with the unit is not allowed�
●
Installation, electrical connection, set-up, programming, configuration,
operation and maintenance of the product must be carried out by personnel
qualified and authorised for the respective activity�
●
Protect units and cables against damage�
●
Replace damaged units, since otherwise the technical data and safety will be
impaired�
3 Functions and features
This device must only be used in industrial machines and installations� Other uses
do not comply with the regulations and are the sole responsibility of the user�
The manufacturer is not liable for damage caused by improper use� The device
must only be installed in compliance with the instructions and only be used and
operated in a perfect technical condition that is in accordance with the technical
data� The device is neither suited for explosion-protected areas nor for areas that
are excluded in DIN EN 61010-1�
