EIO404
Bluetooth Mesh base station
12
7.1 Mounting the connector
To achieve the protection rating indicated in the data sheet, the following has to be observed:
►
Use IO-Link cable with IP class.
►
Connect the connector with the unit. The arrow indicates the position of the coding.
►
Tighten the coupling nut.
►
Minimum tightening torque: 0.6 Nm (tightening by hand)
►
Maximum tightening torque: 1.5 Nm (using a torque wrench).
7.2 Removing the connector
►
Loosen the coupling nut and simultaneously press the connector against the unit.
7.3 UL application area
For use in the USA and Canada:
►
For connecting the device and the IO-Link sensor, use UL-certified cables of category CYJV
2/7/8 having suitable ratings.
7.4 Cable length
►
Maximum cable length of Ethernet connection: 20 m.
►
Maximum cable length of power supply: no recommendation.
►
All cables must be provided with a strain relief approx. 200 mm behind the connectors.