Bluetooth Mesh base station
EIO404
13
8
Indicators, output response and troubleshooting
The indicator shows the current status of the unit via RGB LED.
8.1
RGB indicators
Fig. 4: RGB indicator
8.2
RGB status indication, output response and troubleshooting
The unit provides self-diagnostic options.
Errors are indicated by the red LED.
Type
Description
RGB status
Troubleshooting
---
The unit operates correctly
Green, on
---
2
Voltage too low
Off
Check voltage supply
---
Optical identification
Green, double
flashing
2
Electronics temperature outside
the range
Red, 1Hz
3
No Ethernet device connected
Red, 1Hz
Check Ethernet wiring
2
Hardware failure (HWF)
Red, on
Units faulty, please replace
3
No BT Mesh connection
Red, 1Hz
Check distances to the adapters
---
Bluetooth active
Blue, on
---
---
Mesh provisioning successful
(following device ID message)
Blue, double
flashing (once)
---
---
Device update
Green, flashing
(200ms on, 800ms
off)
Wait until the update is complete
Table 4: Troubleshooting 1: Warning, 2: Failure, 3: Note
Colour
Designation
red
Fault indication
green
Operation indication
blue
Bluetooth
EN