EIO404
Bluetooth Mesh base station
14
9
Parameter setting
The parameters of this unit can be set via 2 interfaces. It is possible to read information or make
changes via Ethernet or Bluetooth. Assigned information and changes are possible for each interface.
For Ethernet, connect the M12 connector to a hardware for parameter setting. The connection is
established via Bluetooth with an app.
Information about suitable parameter setting software at
www.ifm.com
.
9.1
Parameter setting with a PC via Ethernet:
►
Connect the Bluetooth Mesh Base to the PC via the Ethernet M12 connector:
Fig. 5: Parameter setting with a PC
►
Change the parameter settings in the software.
►
Transfer the parameter settings to the device.
9.2
Parameter setting with a mobile device via Bluetooth
►
Supply the Bluetooth Mesh base with voltage
►
An app is used to search for and connect to the Bluetooth Mesh base station
Fig. 6: Parameter setting with a mobile device
►
Change the parameter settings in the software.
►
Transfer the parameter settings to the device.
