5
UK
2 Safety instructions
•
Follow the operating instructions�
•
Improper use may result in malfunctions of the unit� This can lead to personal
injury and/or damage to property during operation of the machine� For this
reason note all remarks on installation and handling given in these instructions�
Also adhere to the safety instructions for the operation of the whole installation�
•
In case of non-observance of notes or standards, specially when tampering
with and/or modifying the unit, any liability and warranty is excluded�
•
The unit must be installed, connected and put into operation by a qualified
electrician trained in safety technology�
•
The applicable technical standards for the corresponding application must be
complied with�
•
For installation the requirements according to EN 60204 must be observed�
•
In case of malfunction of the unit please contact the manufacturer� Tampering
with the unit is not allowed�
•
Disconnect the unit externally before handling it� Also disconnect any
independently supplied relay load circuits�
•
After setup the system has to be subjected to a complete function check�
• Use the unit only in specified environmental conditions (→ 11 Technical data).
In case of special operating conditions please contact the manufacturer�
• Use only as described below (→ 4).
Summary of Contents for efector 110 G1502S
Page 52: ...52...
