![background image](http://html1.mh-extra.com/html/outback-power-systems/flexware16-amp-maximum-250vac/flexware16-amp-maximum-250vac_product-manual_1660849001.webp)
FLEXware16 Amp Maximum 30VDC/250VAC
Rated Relay and DIN Mount Base with LED
The FLEXware Relay Assembly will activate a two-wire start generator
when wired to the AUX output of either an OutBack FX Inverter/Charger
or an OutBack Charge Controller. The assembly consists of an LED
module and a relay inserted (in one orientation) into a base. The base is
mounted onto the DIN rail of any OutBack AC industrial control panel.
Relay Features:
Rated current - 16 amps AC/DC 8 amps per terminal
•
Rated voltage - 30VDC/250VAC
•
Coil power draw - 400 mW
•
Gold contacts for use in low power situations
•
A green LED lights to show the relay energizing when proper
•
voltage is applied to the relay coil connectors.
Base accommodates connections for wiring the coil, common relay
•
contacts, normally open relay contacts, and normally closed relay
contacts.
LED
RELAY
BASE
FRONT VIEW
SIDE VIEW