ifm
System Manual
ecomat
mobile
PDM360NG (CR1080, CR1081, CR9042) Target V01
2011-07-28
Visualisations in the device
Power reserves of the device
124
7.3.1
Resample / scale image
3117
If an image is loaded in the device which does not meet the requirements for size or colour, it is
resized before it is displayed and the colours used are "checked".
Each time the image is opened, it must be resampled. This often leads to much longer times to
change from one image to the other. Remedy:
►
First carry out all transformations of the bitmap or the image in an image processing program on
your computer.
For BasicDisplay: CR0451 only: Transformation to the colour palette will be done during inserting
the bitmap into the project by CoDeSys. On the device itself there won't happen any
transformations (image size, scaling, colour)
►
Only save the suitably transformed images in the device visualisation.
chapter
Image size vector graphics / pixel graphics
(
→
page
7.3.2
CoDeSys visualisations
7398
Available for the following devices:
- PDM360NG: CR108n, CR9042
Further information about CoDeSys visualisation elements:
While the contents of an element are edited, the other data elements of the visualisation are
constantly updated.
Also see: representable
CoDeSys visualisation elements
(
→
page