CR1077
11
Fig. 5: Damping strips
u
Insert the device into the cut-out.
u
Insert the spacer suitable for the panel thickness. The thickness of the spacers corresponds to the
panel thickness. If necessary, use several spacers on top of each other.
u
Screw the fixing profile to the back of the device.
Tightening torque of the M5 hexagon nuts: 5
±0,5
Nm
ATTENTION
Contact corrosion between the mounting screws and the housing.
w
Damage to the device
u
Do not use copper or nickel-plated materials for the bolting elements.
u
Use zinc-plated screws.
u
In very corrosive environments such as extremely salty air, use screws with surface
finishing on a zinc/nickel basis with thick-film passivation and sealing.
