![background image](http://html1.mh-extra.com/html/ifm/ec2121/ec2121_system-manual_3904528010.webp)
Starter kit for ecomatController EC2121
10
► Activate the Windows menu [Internet Protocol Properties Version 4 (TCP/IPv4:
for example [Start] > right click > [Network Connections] > [Ethernet] > [Change adapter settings]
> [Ethernet] > right click > [Properties]
(→ Figure below)
► Click the [Properties] button.
► Select the menu item [Use the following IP address].
► Check the IP address on 192.168.82.xxx and set, if necessary.
The following addresses are already used and must not be used for the PC:
192.168.82.21 (gateway), 192.168.82.247 (controller)
► Enter the subnet mask (255.255.255.0).
► Enter the default gateway (192.168.82.21) (→ Figure below).
► Confirm the settings with [OK].