Starter kit for ecomatController EC2121
27
The ecomatController devices contain two independent programmable logic controllers:
StandardPLC (CR711S standard)
SafetyPLC (CR711S SIL2)
For this first introduction, only the
StandardPLC
is used. The distribution of the resources (e.g.
memory) to the two controllers does not have to be taken into account here.
>
5.2
Connect to the device
57282
First of all, check the connection to the controller:
► In the device tree: Double-click on the controller [CR711S (CR711S)].
>
The corresponding detailed view of CR711S appears.
► Select tab [Communication Settings].
► Click [Scan network…].