![background image](http://html1.mh-extra.com/html/ifm/dv2120/dv2120_operating-instructions-manual_3917076006.webp)
6
4 Installation
►
Disconnect power before installation�
►
For installation choose a flat mounting surface�
Maximum thickness of the mounting surface: 10 mm
Installation example:
►
Create a mounting section Ø 31 mm
►
Only mount the unit in upright position using the supplied M30 nut�
Tightening torque 4�5 Nm�
Special accessories are available to allow mounting the unit using a
mounting tube or pole�
Integrated seals at the bottom of the unit and an O-ring on the cover
prevent penetration of humidity�
More information about available accessories at www�ifm�com