28
IO-PORT IO-1 and IO-2
The IO-channels can be configured to mode “Off”, “Input” or “Output”.
Mode
Function
Off
No function, inactive
Input
IEC 61131 input, payload size 20 bytes
Output
IEC 61131 output, payload size 20 bytes
Input (2 bytes)
IEC 61131 input, payload size 2 bytes
Output (2 bytes)
IEC 61131 output, payload size 2 bytes
Parameter “Data hold time” define how long the IO input data are kept stable. This is helpful if the time interval, in
which the IO input is sampled, is shorter than the Ethernet host can read these over the fieldbus.
Button
Function
Remark
Activate and
save
The settings are activated
and stored non-volatile
After next power-on the stored settings are activated. If
the host connect to the device and write a new IO-Port
configuration the stored values are overwritten
Cancel
Discard changes
-
Tab "Monitor"
This menu shows the data of the Read-/Write head and the state of IO ports of the device.
