23
Tab "Network"
This menu allows different settings Ethernet interface the device to be changed.
Ask what settings for the integration of the device into the existing network needed your network
administrator.
If the device is connected directly to the PC, a static IP address setting is recommended.
Verify and set the IP address of the PC
Make sure that the network address of the PC is located within the address range of the device and
that it differs from it.
Example:
Red marked address settings must be the same, if Subnet Mask of the device is 255. 255. 255.0
Ethernet IP address of the PC:
192.168.0.10
IP address of the evaluation:
192.168.0.79
Attention: Be careful when setting the IP address of the device. This address should not exist in the
Ethernet network.