Pulse stretcher
DP2402
17
[no] = switch is closed when activated.
[nc] = switch is opened when activated.
8.5.2 dIn2 ─ input configuration
Configuration of the evaluation of signals at input IN2.
[PULS] = stretched, shortened and delayed output of an input pulse at the output
[EdG] = output of a pulse with defined duration for a rising edge at the input
[-EdG] = output of a pulse with defined duration for a falling edge at the input
8.5.3 dS2 ─ switch-on delay
Delay when the output OUT2 changes to the active switching status.
This function is only available if [PULS] is selected as input configuration.
8.5.4 dr2 ─ switch-off delay
Delay when the output OUT2 changes to the idle state.
This function is only available if [PULS] is selected as input configuration.
8.5.5 h.t2 ─ hold time
Definition of the hold time of output OUT2 in the active switching status.
This function is only available if [EdG] or [-EdG] is selected as input configuration.
8.6 Parameters of the extended functions (EF)
8.6.1 rES ─ restore factory setting
Resets all parameters to the Factory settings.
u
Select [rES].
u
Press [●].
u
Press and hold [▲] or [▼] until [----] is displayed.
u
Briefly press [●].
8.7 Parameters adjustable via IO-Link
The following functions or parameters are only available via IO-Link tools.
8.7.1 FLASH_ON – activate flashing of the display
Used to identify a unit. Display flashes and shows [dEVC].
