DP2402
Pulse stretcher
16
8.3.2 OUt2 ─ output OUT2
The parameter opens the menu of the settings for OUT2.
8.3.3 EF ─ extended functions
The parameter opens the extended functions menu.
8.4 Parameters for OUT1
8.4.1 ou1 ─ output configuration
Definition of the output logic at output OUT1.
[OFF] = output is switched off.
[no] = switch is closed when activated.
[nc] = switch is opened when activated.
8.4.2 dIn1 ─ input configuration
Configuration of the evaluation of signals at input IN1.
[PULS] = stretched, shortened and delayed output of an input pulse at the output
[EdG] = output of a pulse with defined duration for a rising edge at the input
[-EdG] = output of a pulse with defined duration for a falling edge at the input
8.4.3 dS1 ─ switch-on delay
Delay when the output OUT1 changes to the active switching status.
This function is only available if [PULS] is selected as input configuration.
8.4.4 dr1 ─ switch-off delay
Delay when the output OUT1 changes to the idle state.
This function is only available if [PULS] is selected as input configuration.
8.4.5 h.t1 ─ hold time
Definition of the hold time of output OUT1 in the active switching status.
This function is only available if [EdG] or [-EdG] is selected as input configuration.
8.5 Parameters for OUT2
8.5.1 ou2 ─ output configuration
Definition of the output logic at output OUT2.
[OFF] = output is switched off.
