CR3158
mobileIoT gateway
4
2 Safety instructions
•
The unit described is a subcomponent for integration into a system.
– The system architect is responsible for the safety of the system.
– The system architect undertakes to perform a risk assessment and to create documentation in
accordance with legal and normative requirements to be provided to the operator and user of
the system. This documentation must contain all necessary information and safety instructions
for the operator, the user and, if applicable, for any service personnel authorised by the
architect of the system.
•
Read this document before setting up the product and keep it during the entire service life.
•
The product must be suitable for the corresponding applications and environmental conditions
without any restrictions.
•
Only use the product for its intended purpose (
Ò
Intended use).
•
If the operating instructions or the technical data are not adhered to, personal injury and/or damage
to property may occur.
•
The manufacturer assumes no liability or warranty for any consequences caused by tampering with
the product or incorrect use by the operator.
•
Installation, electrical connection, set-up, programming, configuration, operation and maintenance
of the product must be carried out by personnel qualified and authorised for the respective activity.
•
Protect units and cables against damage.
•
Replace damaged units, otherwise the technical data and safety will be impaired.
2.1 Cyber security
ATTENTION
Operating the machine in an unprotected network environment
w
Unauthorised read or write access to data is possible.
w
Unauthorised manipulation of the device function is possible.
u
Check and restrict access options to the device.
2.2 Air traffic
The device must not be operated on board aircraft.
Using it in an aircraft can affect the navigation and communication systems. An offence can lead to
legal action against the offender.
