IIoT controller
AE3100
11
6 Installation
6.1 Install device
The housing of the device has the following holes:
2
1
1: Rear: DIN rail adapter
2: Left side: DIN rail adapter
This results in the following options for DIN rail mounting:
2
3
1
1:
Upright on horizontal DIN rail
2:
Flat on horizontal DIN rail
3:
Flat on vertical DIN rail
The device may only be mounted and operated on a grounded DIN rail. This ensures the
functional earth (FE) required for the operation of the device.
u
Disconnect power before installation.
u
Fasten the DIN rail holder (
Ò
items supplied) onto the housing side of your choice using the 2
mounting screws. Max. torque: 1.7 Nm.
u
Make sure you are certain during assembly that the cooling fins of the mounted device run
vertically.
u
Mount the device on a 35 mm DIN rail in a control cabinet (min. protection rating: IP 54). The
control cabinet should be mounted in accordance with local and national regulations.
u
Leave at least 50 mm space between the device and the top or bottom of the control cabinet as
well as to adjacent devices to enable air circulation and to avoid inadmissible heating.