IFM AL1352 Operating Instructions Manual Download Page 12

Page: 12 / 84

IO-Link Master with IoT Interface DataLine 8 Ports IP 65 / IP 66 / IP 67

4.1.5

Visual indication

34192

The device has the following visual indicators:



Status and error indication of the gateway, of the IoT core connection and of the system



Status display of the voltage supply



Status and activity display of the Ethernet connection



Status, error and short circuit/overload indication of the IO-Link ports

4.2

Digital inputs

33817

The device has 8 additional digital inputs (type 2 according to EN 61131-2).

The digital inputs are on pin 2 of the IO-Link ports X01...X08.

All inputs refer to the potential of the device supply (pin 3).

4.3

IO-Link supply

34077

The device has 8 supplies for IO-Link devices.

The IO-Link ports X01...X08 are ports class A.

Every supply provides short circuit monitoring.

The device ensures fire protection for the connected IO-Link devices by providing a power-restricted
circuit at the IO-Link ports (according to IEC61010-1 and Class 2 according to UL1310).

Summary of Contents for AL1352





















































































Search results

Summary of Contents for AL1352

Reviews:

Related manuals for AL1352

Brands by name

Popular brands

IFM AL1352, Operating Instructions Manual

Search results

Summary of Contents for AL1352

Reviews:

Related manuals for AL1352

Brands by name

Popular brands