![background image](http://html1.mh-extra.com/html/ifm/al1330/al1330_operating-instructions-manual_3887894024.webp)
IO-Link master with EtherCAT interface DataLine 4 ports IP 65 / IP 66 / IP 67
24
9.1
LR DEVICE
Content
Remarks ................................................................................................................................................. 25
IoT: Configure IP settings ....................................................................................................................... 25
IoT: Configure security mode ................................................................................................................. 26
IoT: Configuring access rights ................................................................................................................ 27
IoT: Configure the interface to LR AGENT or LR SMARTOBSERVER ................................................. 28
Fieldbus: Configure EtherCAT interface ................................................................................................. 28
IO-Link ports: Activate data transfer to LR AGENT or LR SMARTOBSERVER .................................. 29
IO-Link ports: Configure operating mode ............................................................................................... 30
IO-Link ports: Set the device validation and data storage ...................................................................... 31
Info: Show device information ................................................................................................................ 32
Firmware: Reset device to factory settings ............................................................................................ 32
Firmware: Reboot the device.................................................................................................................. 32
Configure IO-Link devices ...................................................................................................................... 33
33692
On delivery, the AL1330 is configured with the factory settings (
→
Factory settings
(
Required software: LR DEVICE (1.5.0.x or higher) (art.-no.: QA0011/QA0012)