background image

3

UK

1  Preliminary note

•  An instruction is indicated by „►“: 

Example: ► Mount the unit as shown�

Important note 

Non-compliance can result in malfunction or interference�

Information 

Supplementary note�

2  Safety instructions

•  Please read the operating instructions prior to set-up of the device� Ensure that 

the product is suitable for your application without any restrictions�

•  The unit conforms to the relevant regulations and EC directives�
•  Improper or non-intended use may lead to malfunctions of the unit or to 

unwanted effects in your application�

•  Installation, electrical connection, set-up, operation and maintenance of the 

unit must only be carried out by qualified personnel authorised by the machine 

operator�

3  Functions and features

•  Vibration detection of machines and equipment

•  For connection to diagnostic electronics VSExxx

4  Electrical connection

The unit must be connected by a qualified electrician�

The national and international regulations for the installation of electrical 

equipment must be adhered to�

 

► Disconnect power�

 

► Connect the unit�

Wiring

blue: GND / black: test / brown: L+ / white: out

shield wire: screen

Summary of Contents for VSA003






Reviews: