Ensure a tight and secure fit.
Make sure that no metallic compo-
nents are in the immediate vicinity
of the sensor or approach the sen-
sor during operation (especially no
metal rings around the sensor etc.)!
This might impair the function of
the sensor.
Fixing elements such as screws,
clamps and similar small metal parts
(< 20 x 30mm) have no effect on
the sensor.
For safe functioning the adapter (3)
must consist of plastic.
3 Electrical connection
The unit must be connected by a qualified electrician. The national and
international regulations for the installation of electrical equipment
must be observed.
Disconnect power before connecting the unit as follows:
21
3
y
A
X
A = metallic objects
x = min. 10mm
y = min. 46,5mm
L+
L
1
5
4
2
3
5: OUT1 = seat
2: OUT2 = close
4: OUT3 = open
Summary of Contents for efector180 IX5010
Page 4: ...Nicht zulässige Formen und Abmaße des Targets 4 Ø24mm 5mm Ø24mm 10mm Ø24mm 10mm Ø24mm 10mm ...
Page 18: ...Non permissible shapes of the target 18 Ø24mm 5mm Ø24mm 10mm Ø24mm 10mm Ø24mm 10mm ...
Page 32: ...Formes et dimensions non permises de la cible 32 Ø24mm 5mm Ø24mm 10mm Ø24mm 10mm Ø24mm 10mm ...
