background image

3  Functions and features

The unit monitors the level of liquids in tanks�

3.1  Applications

 

● Water, hydrous media, oils, coolant emulsions�

3.2  Restriction of the application area

 

● The unit is not suitable for acids, alkalis, granulates, bulk materials�

 

● It is not suitable for hygienic areas� 

 

● Highly conductive foam can trigger a switching operation� Check the conse-

quences by performing a test in your application! 

 

● Maximum tank pressure: ± 0�5 bar (when mounted using the appropriate 

mounting accessories; → chapter 5�2 Installation procedure)�

4  Function

4.1  Measuring principle

The unit operates to the capacitive measuring principle� By direct contact with the 

medium the unit detects whether the maximum level (limit level) is reached and 

indicates this by a switched signal�

Max� level reached

output open (OFF)

Max� level not reached

output closed (ON)

The dielectric constant of a medium is important for its detection� Media with a 

dielectric constant > 1�8 are safely detected�

Dielectric constants of common liquids
Mineral oil

≈ 2

Coolant emulsion

≈ 25���75

Glycol

≈ 37

Water

≈ 80

Water, demineralised

≈ 30

Electrically conductive and non conductive media are detected�

Summary of Contents for efector160 LI214 Series











Reviews: