background image

5.2  Mounting

The unit is mounted using a mounting clamp or an adapter� The following standard 

mounting accessories are available:

Order no� Material

E43000

mounting clamp (for non-pressurised tanks) 

E43001

flange plate 73-90 with clamp adapter (pressure rating of 0�5 bar)

E43002

welding adapter with clamp adapter (pressure rating of 0�5 bar)

E43003

mounting adapter G¾ with clamp adapter (stainless steel, pressure rating of 0�5 bar)

E43004

mounting adapter G1 with clamp adapter (stainless steel, pressure rating of 0�5 bar)

E43005

 flange plate 100-125 with clamp adapter (aluminium, pressure rating of 0�5 bar)

E43006

flange plate 65-80 with clamp adapter (aluminium, pressure rating of 0�5 bar)

E43007

flange plate 54 - 52x52 with clamp adapter (aluminium, pressure rating of 0�5 bar)

E43016

mounting clamp with mounting bracket (for non-pressurised tanks)

E43019

mounting adapter G¾ with clamp adapter (brass, pressure rating of 0�5 bar)

Further accessories on request�

5.3  Set the installation depth

MET

L3

A

H

L1

L

L2

S

M

A = response level
H = tank height
L = probe length
L1 = installation depth
L2 = extension length
L3 = installation depth (min�: 60 mm)
M = height mounting adapter
MET = max� immersion depth
(Active zone) = 31 mm
S = height of the connection piece

 

► Select the installation depth L1 so that the MET zone is covered when the 

response level A has been reached, that is:  

L1 = (H - A) + MET + S�

Summary of Contents for efector160 LI214 Series











Reviews: