11
UK
8.3.1 Explanation min/max memory (MEM)
Lo�F
Minimum value of the flow measured in the process
Hi�F
Maximum value of the flow measured in the process
Lo�T
Minimum value of the temperature measured in the process
Hi�T
Maximum value of the temperature measured in the process
8.3.2 Explanation display function (DIS)
diS�L
Standard layout of the display(L1: flow or L2: flow and temperature)
diS�U
Update rate of display
diS�R
Display rotation
diS�B
Display brightness
coL�F
Colour configuration volumetric flow
coL�T
Colour configuration temperature
OFF No colour change
rEd Process value always red
GrEn Process value always green
r-cF Display red if measured value between limit values cFL���cFH
G-cF Display green if measured value between limit values cFL���cFH
cFH�F
Upper limit value for colour change flow
Only if r-cF or
G-cF is selected�
cFL�F
Lower limit value for colour change flow
cFH�T
Upper limit value for colour change temperature
cFL�T
Lower limit value for colour change temperature
9 Parameter setting
Parameters can be set before installation and set-up of the unit or during opera-
tion�
If you change parameters during operation, this will influence the function
of the plant�
► Ensure that there will be no malfunctions in your plant�
During parameter setting the unit remains in the operating mode� It continues to
monitor with the existing parameter until the parameter setting has been complet-
ed�
