13
UK
8.2 Explanation of the menu
ASP1
Analogue start value for temperature�
AEP1
Analogue end value for temperature�
ASP2
Analogue start value for volumetric flow�
AEP2
Analogue end value for volumetric flow�
EF
Extended functions / opening of menu level 2�
HI�F Maximum value memory for volumetric flow�
LO�F Minimum value memory for volumetric flow�
HI�T Maximum value memory for temperature�
LO�T Minimum value memory for temperature�
CGA Customer-specific calibration of the curve of measured values for volumetric
flow�
CAr Calibration reset�
FOU1 Behaviour of output 1 in case of an internal fault�
FOU2 Behaviour of output 2 in case of an internal fault�
dAP Measured value damping / damping constant for volumetric flow in seconds�
diS Update rate and orientation of the display�
Uni�F Standard unit of measurement for volumetric flow: litres/minute (lmin), cubic
metres/hour (m
3
h), gallons per minute (gpm) or gallons per hour (gph)�
Uni�T Standard unit of measurement for temperature: °C or °F�
SELd Standard process category of the display: volumetric flow value / meter
count / medium temperature�
MEDI Selection of the medium to be monitored�
rES Restore factory setting�
