IFM Electronic E2D400 Series, User Manual

Page: 24 / 160

Page 14
E2D400 Series Panel PC
then connected directly to the RJ-45 connectors on the bottom panel and provides
external GbE connectivity. Some of the RTL8111CP controller features are listed below:
 Integrated 10/100/1000 transceiver
 Supports PCI Express™ 1.1
 Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
 Supports IEEE 802.1P Layer 2 Priority Encoding
 Supports IEEE 802.1Q VLAN tagging
 Serial EEPROM
 Transmit/Receive on-chip buffer support
 64-pin QFN package (Green package)
2.4.3 External USB Connectors
There are four USB 2.0 connectors on the bottom panel of the E2D400. All USB 2.0
connectors are interfaced directly to the USB controllers on the ICH7-M southbridge.
These USB connectors are fully compliant with USB specification Revision 2.0 and USB
specification Revision 1.1 and can be interfaced to both USB 1.1 and USB 2.0 compliant
devices.
Figure 2-5: External USB Ports
2.5 E2D400 Front Side
2.5.1 Monitor
A LCD screen is installed on the front of the E2D400 series. The screen is shown in
Figure 2-6 below.