IFM Electronic AL1121, Operating Instructions Manual

Page: 67 / 109

67
ifm Operating Instructions IO-Link Master with EtherNet/IP interface StandardLine 4 Ports IP 69K (AL1121) 2017-05-31
Appendix
>
Configuration Assembly
10233
The values of the Configuration Assembly are set in RSLogix 5000 via the controller tags of
the EtherNet/IP project.
Byte Content
0 Communication profile (
→ Communication profile
(
→ p.
68 ))
1 Process data length (
→ Process data length
(
→ p.
68 ))
2 X01: Operating mode (
→ Port configuration
(
→ p.
69 ))
3 X01: Cycle time IO-Link master - IO-Link device (
→ Port configuration
(
→ p.
69 ))
4 X01: Byte swap (
→
Port configuration
(
→ p.
69 ))
5 X01: Data storage and validation (
→
Port configuration
(
→ p.
69 ))
6 X01: Vendor ID (LSB) (
→
Port configuration
(
→ p.
69 ))
7 X01: Vendor ID (MSB) (
→
Port configuration
(
→ p.
69 ))
8 X01: Device ID (LSB) (
→ Port configuration
(
→ p.
69 ))
9 X01: Device ID (
→ Port configuration
(
→ p.
69 ))
10 X01: Device ID (MSB) (
→ Port configuration
(
→ p.
69 ))
11 X01: reserved
12 X01: Fail safe mode (
→ Port configuration
(
→ p.
69 ))
13 X01: Fail safe value of DO (pin 4) (
→ Port configuration
(
→ p.
69 ))
14...25 X02: Parameters of the IO-Link ports (
→ lines 2...13)
26...37 X03: Parameters of the IO-Link port (
→ lines 2...13)
38...49 X04: Parameters of the IO-Link port (
→ lines 2...13)