12
10
10. Locate the Upper Wires (68) inside the
Handlebar (7).
While a second person holds the Console (9)
near the Handlebar (7), connect the wires on the
Console to the Upper Wires (68). Then, insert
the wires into the Handlebar.
Tip: Avoid pinching the wires.
Slide the
Console (9) onto the Handlebar (7).
Attach the Console (9) with four #8 x 3/4"
Screws (94).
11.
After the training bike is assembled, inspect it to make sure that it is assembled correctly and that it
functions properly. Make sure that all parts are properly tightened before you use the training bike.
Note: Extra parts may be included. Place a mat beneath the training bike to protect the floor.
9
7
68
68
94
Avoid pinching
the wires
63
61
9. Identify the Left Pedal (61).
Using an adjustable wrench,
firmly tighten
the
Left Pedal (61)
counterclockwise
into the Left
Crank Arm (63).
Tighten the Right Pedal (not shown)
clockwise
into the Right Crank Arm (not shown).
9
Summary of Contents for PRO-FORM 1350
Page 4: ...4...
