27
Alarm
：
When there are alarm input signals, the user can select the
recording channel and the output port. In
Alarm Port
, the user
can choose from 1 to 16 or ALL. Record Channel means when there
is an alarm input at an alarm port, the system can start up
recording at the corresponding channels which have check marks in
the check boxes.
After setting one alarm port, click
Save Port
to save the setting.
After setting all ports, the user should click
Save
to save.
Motion detection
：
When the user set the time period for motion detection (the
time period can not overlap with the time for the general recording. The general
recording has higher priority), motion detection will take effect. The purple area is
the selectable motion detection area. User can move the cursor to choose the area
and can also set the sensitivity of the area due to the need. Click
Full screen
or
press right key on the area to display the motion detection area at full screen. After
setting the area the user can
Save channel
or
Clear
the area.
Alarm Output
：
This field allows the user to activate an output relay. If you want
to set this channel fully as motion detection recording, you have to turn off the
timing recording of this channel.
Video parameter User can adjust the video Hue, Contrast, Brightness,
Saturation and so on. Click
Reset
to reset default value
.
4.1.5. Assistant
Assistant
：
Click on Assistant button, as following, there are User
manage, Record control, Apply for control right, Log information,
System information, Alarm prompt , Channel name, Upgrade BIOS
and About
