26
4.1.4. Config (System Setting)
Click
Config
button
，
and pop up the dialogue box. There are
General
、
Schedule
、
Image
、
Alarm
、
Motion detection
Video parameter
tabs of
six setting menus.
Note
：
The grey part of the menus that cannot be changed can only be
modified directly at the DVR.
General
：
Include the recording length setting. In
Control
Column select the
channel number and its pan-tilt decoder’s protocol, as well as the related
address so as to realize the control of the lens and pan-tilt.
Schedule
：
Able to select the different channel and date to perform the
recording at the different period of time. Schedule recording includes
general recording, motion detection recording and alarm recording.
There are six time periods for setting in each recording type. The set time in
general recording are independent with the set time in Motion detection and
alarm. Only when status is On, the set time period takes effect. If the states
of the two time periods are both Off, the system will not record in this
recording type.
Image
：
This menu can select the coding style, image quality and protocols
for each channel. After finishing one channel setting, click
Save
to save the
setting of this channel. You can continue to set the image attributes of other
channel. Finally, click
Save
on the bottom of the dialogue box to save all
setting.
Frame rate has 1f/s
、
2f/s
、
3f/s
、
6f/s
、
12f/s
、
20f/s. Coding style has
VBR(variable bit rate) and CBR. When in VBR style, there are 1,2,3,4,5,&6
levels of image quality. When in CBR style, selectable data flux are 128Kb/S,
256Kb/S, 384Kb/S, 512Kb/S, 768 Kb/S, 1024Kb/S. The different data flux
demands on the related bandwidth and the transmission image quality is
also different. Among them Level 6 demands on the widest band and has
the best image quality.
Alarm when video lost: Off
means no alarm.
On
means alarm when video lost
