Outer duct cover
Duct bracket
Inner duct cover
Blower box
Air outlet
Control
Glass Panel
IFB chimney can be installed either in Re-circulation mode or Ducting mode on depending
on the models For efficiency, ensure that gap between the cooking appliances grid and the
chimney should be in-between 650mm to 750mm (maximum) ideal is 650mm.The
installation must be carried out by qualified & competent person or authorized By IFB with
thorough knowledge . The chimney can be ducted to the outside either using flexible or
rigid fire retardant ducting pipe of 120 or 150mm or 4 inch or 6 inch (Depends on the
models) however choice is left with the installer. Use the rated size for the outlet duct pipe.
Smaller size of the duct pipe may reduce the efficiency, may produce more noise &
vibration, same will depend on the numbers of bends & length of the duct pipe. However
choice is left with Installer. The installer will provide the suitable ducting and sealing
material for the installation .For better performance the route of the duct pipe must be kept
as short as Possible.
INSTALLATION GUIDE
5
IFB -GL-932-60CM/90CM
22
Company is not liable for any delay in servicing due to the reason that it is beyond the
control of the company or any of its authorized service network.
This warranty does not cover defects resulting from the accidents or damage while in
transit or to our service center.
This warranty does not cover for consumables in all the product categories for example
bulbs, any kind of filters charcoal & metal, all glass parts, spark plugs, knobs & outer body
/ body parts & any type of painting, plating, enameling including rusting etc. or defects
thereof.
In case of no authorized service centre present in the area/ or in case service is to be
provided beyond municipal/city limits , then services would be provided from the nearest
authorized service area , a fixed charge would be applied (subject to distance are minimum
RS.250/-) in additionto the actual to & fro charges along with local conveyance by the
shortest route. However, in order to avail the services, the products could also be brought
at the nearest authorized service centre by the customer at their own expenses and risk/
damage.
In case warranty period is more than a year after the period of one year , prevailing visiting
/repairing charge will be charged as and when the customer calls. However, the spare parts
would still be covered under the scheme and would not attract any charges through out the
warranty period of the respective product.
The company undertakes no liability in the matter of consequential loss and / or damages
caused to the customer or third party/pet any type of property due to failure / malfunction
of the machine. Obligation under this warranty shall be limited to repairing or replacing
the defective part.
Any routine maintenance / cleaning / servicing visit would not be covered under this
warranty, and would be provided on chargeable basis as per prevailing rates / charges.
Whether defective components are to be replaced / repaired shall be left to the sole
discretion of the company. In case of replacement of a part, the defective part removed
from the product becomes the property of IFB Industries Ltd.
If the Appliance /Components Serial No. Sticker/Plate is removed/ missing/altered /tampered.
Appliances taken out of India.
Damages occurred due to improper electric circuits outside the Appliance & failure due to
erratic power supply.
Failure/damage done to the appliance due to operation in an abnormally corrosive Alkaline
/ Acidic atmosphere, and or use of harmful chemicals.
If defects/damage arise with optional accessories like Extended Power Supply Cable/
Frame etc thereof..Failure/damage due to misuse/negligence/accidents/abuse,action of
pests/rodents, fire, flood, earthquake, lightning or any other act of nature/natural
calamities & damages traceable to alteration or unauthorized repairs.
Parts replaced or repaired under this warranty are warranted throughout the remaining of
the original warranty period only.
Reducer for
φ
120 out-let
