12
Inner duct cover
Outer duct cover
Bracket
Inner duct
cover
M4 Screw
Exhaust pipe
Reducer for
120mm outlet
Step 3:
Matching the bracket to the holes
of the inner duct cover and fix it
well with M4 screws.
Matching the bracket to the holes
of the Outer duct cover and fix it
well with M4 screws.
Step 2:
Take out of the cooker hood from
the carton and put it on a horizon-
tal work table gently. Fix the
reducer pipe into the air outlet of
the inner duct, and then fix the
exhaust pipe into the top of reducer,
make sure is connect the reducer
tightly.
Wood Screw
5x60
Expanding Tube
Hook
400
Step 1:
According to the size of the holes.
Drill A.B.C.D.4 holes in level in the
wall with 8mm in diameter and 75-85mm
in depth.Press the 4 expanding tube
provided into the holes.Tighten the
4 wood screws of 5x60mm which
supply together with the hood to the
expanding tube,make sure it is fixed
enough and can not move.
Step 4:
Insert the inner duct cover into the
outer duct cover.
15
Model: IFB -GS-60T-PL/90T-PL
A B C D E F
This switch is highly-sensitive touch control, use your figure touch the key-press
slightly to operate it. And this switch with smoke sensor function.Choice of Auto
start & manual start in the manual .
F
A
E
C&D
B
B
A:
Lamp
Touch this button one time, the lamp will be lighted, touch again, the
lamp will extinguish.
B:
Timer
When the cooker hood in standby mode, touch this button 3 seconds
,the cooker hood enter into time setting state and the display screen
shows the numbers. Touch + set hour (0-23 circle set) and touch - set
minute(0-59 circle set), If in 10 seconds ,you don't have any
operation or touch this button again ,then exit time setting state and
save the times which you just set.
When the cooker hood is working, touch this button one time, then it
will be in timing shutdown mode and the display screen shows
03:00,each time touch can increase 1 minute, you can set timer from
0-60 minute. If in 10 seconds ,you don't have any operation, then the
cooker hood work in timing shutdown mode, the lamp can turn
on/off and the speed can change in this mode. If you touch this button again, then the
cooker hood exit this mode. In the last 3 seconds of the time set, the cooker hood will have
three DDD sound .In 60 seconds delay mode, touch this button, then will exit 60 seconds
delay mode.
C&D
- In
standby
mode, touch
this
two button to adjust the speed you need.
E:
Speed/Sensor
1
.
Speed
function--In
standby
mode, touch
this
button
one
time, the
cooker
hood
will
start
at
high
speed, touch
this
button
again, the
cooker
hood
will
turn
off
.
2
.
Sensor--In
standby
mode, touch
this
button
3
seconds, then
it
enter
to
automatic
sensor
mode,
“
AUTO”flash in
the
display
screen, then
means
that
the sensor
is
working
,
the
motor
and
the
lamps
will
turn
on
automatically
if
the
smoke/temperature
in
kichen
near
the
hood
increase
rapidly
and
it
would
turn
off
automatically
when
the
smoke/temperature
decrease
rapidly, touch
this
button
3
seconds
again, then
it
will
exit
automatic sensor ,“AUTO”extinguish
in
the
display
screen. In
automatic sensor
mode, the
button
+/-, ,
cann't
use
.
F:
Power/off
When
the
cooker
hood
in
original
state, touch
this
button, it
will
enter
to
standby
mode, touch
this
button
again, it
will
turn
off
the
power
.
When
the
cooker
hood
is
working, touch
this
button
one
time, it
will
delay
60
seconds. The
lamp
can
turn
on/off
and
the
speed
can
change
in
this
mode
.
Touch
this
button
again, then
it
will
turn
off
the
cooker
hood
immediately
.
When
the
cooker
hood
in
timing
shutdown
mode, touch
this
button
one
time, it
will
exit
timing
shutdown
mode
and
works
in
60
seconds
delay
mode
.
When in automatic state, the motor and the lamps will turn on
automatically if the smoke in kitchen near the hood increase rapidly.
And it would turn off automati cally when the smoke decreased.
(PS: When the hood is in automatic state, other buttons of the switch and the remote control
are both could not be operated.)
