13
Step 6:
1. Draw the inner duct cover up to
the suitable high, mark on the wall
two keyhole of the outer duct cover
bracket with pen .
2. Put down the inner duct cover
gently, drill the keyholes in 75-85
mm depth on the horizontal level
using 8mm drill.
3. Press the expanding tube provided
into the holes.
4. Matching the inner duct cover with
the holes, tighten the inner duct
cover with two 5x60 wood screw
provided
Step 7:
Extend the air outlet of the exhaust
pipe out-of-door. Try to make the
bend of the exhaust pipe is more
than 120
°
.
Step
5
:
Matching the holes of outer duct
cover and blower box
,
fix the outer
duct cover to the blower box using
8pcs M4
×
10 screw provided with
the fixing tool
.
As the direction of
illustrated
.
5x60
Wood Screw
Expanding Tube
5x60
Wood Screw
Expanding Tube
A
B
C
D
E
INSTRUCTIONS FOR USE
LAYOUT FOR THE CHIMNEY CONTROL SWITCH
Model: IFB-GN-5P-60CM
&
/90CM
IFB-GL-6P-60CM/90CM
& IFB-SS-63P-60CM/90CM
A : When the hood is operating,press button A( ),
the hood will be off.
B :Press button B( )
，
the fan runs at the low speed.
C: Press button C( ), the fan runs at the mid speed.
D :Press button D( ), the fan runs at the high speed.
E: Press button E( ) once,turn on the light.Press it again,turn off the light.
14
A B C D E
A :Lamp
Touch this button one time, the lamp will be lighted, touch again, the lamp will extinguish.
B:Timer
When the cooker hood in standby mode, touch this button 3 seconds, the cooker hood enter
into time setting state and the display screen shows the numbers. Touch Lamp button can
set hour(0-23 circle set) and touch Speed button can set minutes(0-59 circle set),if in 10
seconds ,you don’t have any operation or touch this button again, then exit time setting
state and save the time which you set.
When the cooker hood is working, touch this button one time ,then it will be in timing
shutdown mode and the display screen shows 03:00,each time touch can increase 1
minute, you can set the timer from 0-60 minute .If in 10 seconds ,you don’t have any
operation ,then the cooker hood work in timing shutdown mode, the lamp can turn on /off
and the speed can change in this mode. If you touch this button again, then the cooker hood
exit this mode. In the last 3 seconds of the time set ,the cooker hood will have three DDD
sound. In 60 seconds delay mode, touch this button, then will exit 60 seconds delay mode.
C:Display screen
Display time or timing shutdown.
D:Speed/Off
In standby mode, touch this button one time, the cooker hood will start at high speed,
touch this button second time, then will be middle speed, touch this button third time, then
will be low speed, touch this button forth time, then the cooker hood will turn off .
E:Power/Off
When the cooker hood is working, touch this button one time ,it will delay 60 seconds. The
lamp can turn on /off and the speed can change in this mode.
Touch again, then will turn off the cooker hood immediately.
When the cooker hood in timing shutdown mode, touch this button one time ,it will exit
timing shutdown mode and works in 60 seconds delay mode.
Model: IFB-GL-90 ISLAND-90CM & IFB-GL-14T-60CM/90CM
