User manual
DUM1017795-EN
33
I
CAUTION
RISK OF DAMAGE TO THE TERMINAL
• DO NOT use a high pressure jet to clean the charger.
• Preserve the charger from contact with gasoline, diesel and other automotive fluids.
• DO NOT use solvents to clean the charger.
Failure to follow these instructions can result in minor or moderate injury.
I
WARNING
RISK OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
• To avoid danger of electrical shock or injury, turn off power at the panel board or load
center before working on the equipment or removing any component. Do not remove circuit
protective devices or any other component until the power is turned off.
• Disconnect electrical power to the harging station before any maintenance work to ensure
that it is separated from the supply of AC mains. Failure to do so may cause physical injury or
damage to the electrical system and charging unit.
• Maintenance of the charging station shall be conducted only by a qualified technician.
• Wait 15 minutes before opening the door. Residual voltage remains present after the
power failure.
Failure to follow these instructions can result in death or serious injury
The charger should only be cleaned with a dry cloth, twice a year, with the product switched off and not con-
nected.
Every 6 months:
• Conduct a visual inspection of the air inlet of the charger and ensure that they are not clogged.
• Conduct a visual inspection of the charging cable and ensure that cable does not show any visual damage
or deformation.
• Conduct a visual inspection of the charging connector and ensure that it does not show any visual damage,
arcing or rust.
