IEI Technology WSB-Q354, User Manual

Page: 87 / 205

WSB-Q354 PICMG 1.0 CPU Card
Page 72
5.6.2 CPU Card Installation
To install the WSB-Q354 CPU card onto the backplane, carefully align the CPU card
interface connectors with the corresponding socket on the backplane. To do this, please
refer to the reference material that came with the backplane. Next, secure the CPU card to
the chassis. To do this, please refer to the reference material that came with the chassis..
5.7 Internal Peripheral Device Connections
5.7.1 Peripheral Device Cables
The cables listed in Table 5-3 are shipped with the WSB-Q354.
Quantity Type
1 Dual RS-232 cable
6 SATA drive cables
3 SATA drive power cables
1 USB cable
Table 5-3: IEI Provided Cables
Separately purchased optional IEI items that can be installed are listed below:
Audio kit
Keyboard/mouse cable with bracket
TPM Module
For more details about the items listed above, please refer to Chapter 3 . Installation of the
accessories listed above are described in detail below.
5.7.2 Dual RS-232 Cable Connection
The dual RS-232 cable consists of two connectors attached to two independent cables.
Each cable is then attached to a D-sub 9 male connector that is mounted onto a bracket.
To install the dual RS-232 cable, please follow the steps below.