IEI Technology WSB-Q354 User Manual Download Page 79

Page: 79 / 205

WSB-Q354 PICMG 1.0 CPU Card

Page 64

Figure 5-4: Insert the Socket LGA775 CPU

Step 8:

Close the CPU socket.

Close the load plate and engage the load lever by

pushing it back to its original position. Secure the load lever under the retention

tab on the side of CPU socket.

Step 9:

Connect the CPU 12V cable to the 12V power.

After the cooling kit is installed

connect the CPU cable to the CPU 12V power connector.

Step 0:

5.4.2 Socket LGA775 CF-520 Cooling Kit Installation

WARNING:

It is strongly recommended that you DO NOT use the original heat

sink and cooler provided by Intel® on the WSB-Q354.

IEI’s cooling kit (CF-520) includes a support bracket that is combined

with the heat sink mounted on the CPU to counterweigh and balance

the load on both sides of the PCB.

Summary of Contents for WSB-Q354














































































































































































































Search results

Summary of Contents for WSB-Q354

Reviews:

Brands by name

Popular brands

IEI Technology WSB-Q354, User Manual

Search results

Summary of Contents for WSB-Q354

Reviews:

Brands by name

Popular brands